The Fenix SW05R-UV is a clip-on flashlight that combines a white LED for general work lighting with a 365 nm UV LED for professional inspection work.
The Fenix SW05R-UV is a clip-on flashlight that combines a white LED for general work lighting with a 365 nm UV LED for professional inspection work. The white light delivers up to 150 lm and reaches up to 39 metres. The lamp head adjusts up to 200°, allowing you to direct the light onto the work surface even when the lamp is attached using the clip or magnet. Suitable for Examining UV-reactive security features on documents Checking fluorescent markings during maintenance and inspections Illuminating equipment, cabinets and work surfaces with white light Working with white light when the lamp is clipped to the edge of a pocket or vest Close-up work in the garage or workshop, where the lamp can be attached to a steel surface Why choose the Fenix SW05R-UV? Separate switches control the white and UV light. The hinged lamp head lets you change the light angle without repositioning the lamp. The body clip and magnetic base leave both hands free for work. The 30 lm white light setting runs for up to 12 hours and 17 minutes on a single charge. The lamp weighs 55 g and charges via USB-C in approximately two hours. Technical specifications Manufacturer: Fenix Model: SW05R-UV Colour: black Light sources: white LED and 365 nm UV LED White light colour temperature: approximately 6500 K White light, low: 5 lm, up to 7 m, up to 49 hours White light, medium: 30 lm, up to 17 m, up to 12 hours and 17 minutes White light, high: 150 lm, up to 39 m, up to 2 hours and 32 minutes UV mode: 365 nm, up to 1500 mW, total runtime up to 3 hours and 14 minutes Battery: built-in 700 mAh battery Charging: USB-C Charging time: approximately 2 hours with a 5 V / 500 mA adapter Lamp head adjustment range: up to 200° Attachment: body clip and magnetic base Lens material: polycarbonate Protection rating: IPX6 Drop test: 1 m Dimensions: 81.2 × 35 × 18 mm Weight: 55 g including battery The total UV mode runtime includes operation at reduced power. Included Fenix SW05R-UV flashlight with body clip USB-C charging cable User manual and warranty card Frequently asked questions What is the Fenix SW05R-UV 365 nm light suitable for? The 365 nm UV light helps reveal markings that react to this wavelength, such as fluorescent security features on documents. Fenix intends the UV mode for professional inspection work. How do I switch between white and UV light on the SW05R-UV? Hold down the button for the desired light source for about half a second. The front button controls the white light and the side button controls the UV light. You can switch between the three white light levels with short presses of the front button. How do I use the SW05R-UV UV mode safely? Wear certified UV safety glasses and cover your skin. Direct the beam at the object being inspected and take care with reflections from glass, shiny metal and other surfaces. When is the Fenix SW05R-UV the right choice? The SW05R-UV is suitable when you need both white light for close-up work and 365 nm UV light during the same working day. If you work with both hands for long periods and need the light to follow your gaze, a headlamp is more convenient. A handheld flashlight with a longer beam is suitable for checking a more distant outdoor area or section of road. Our recommendation For close-up work with white light, try the 5 lm setting first. It may be enough to read a display or see the contents of a drawer. If you need a view of the entire work surface, select 30 lm and direct the lamp head slightly from the side. When attaching the lamp with the magnet, test its hold before letting go. When clipping it to the edge of a pocket, adjust the light angle after positioning the clip. For UV inspection, choose a matt work surface if possible and direct the lamp head at the object to be inspected before switching on UV mode. If the next task requires regular light, you can switch on the white LED using its separate button. After working, switch off the lamp before putting it in a bag. If you use the lamp for shift work, keep the charging cable in a designated place so the next user can charge the battery immediately if needed. Clip-on UV flashlight for inspection and close-up work The Fenix SW05R-UV provides both white work light and 365 nm UV light in a single unit. Choose this model if you need a portable inspection light that you can attach at a suitable angle while you work.
The Fenix SW05R-UV is a clip-on flashlight that combines a white LED for general work lighting with a 365 nm UV LED for professional inspection work. The white light delivers up to 150 lm and reaches up to 39 metres. The lamp head adjusts up to 200°, allowing you to direct the light onto the work surface even when the lamp is attached using the clip or magnet. Suitable for Examining UV-reactive security features on documents Checking fluorescent markings during maintenance and inspections Illuminating equipment, cabinets and work surfaces with white light Working with white light when the lamp is clipped to the edge of a pocket or vest Close-up work in the garage or workshop, where the lamp can be attached to a steel surface Why choose the Fenix SW05R-UV? Separate switches control the white and UV light. The hinged lamp head lets you change the light angle without repositioning the lamp. The body clip and magnetic base leave both hands free for work. The 30 lm white light setting runs for up to 12 hours and 17 minutes on a single charge. The lamp weighs 55 g and charges via USB-C in approximately two hours. Technical specifications Manufacturer: Fenix Model: SW05R-UV Colour: black Light sources: white LED and 365 nm UV LED White light colour temperature: approximately 6500 K White light, low: 5 lm, up to 7 m, up to 49 hours White light, medium: 30 lm, up to 17 m, up to 12 hours and 17 minutes White light, high: 150 lm, up to 39 m, up to 2 hours and 32 minutes UV mode: 365 nm, up to 1500 mW, total runtime up to 3 hours and 14 minutes Battery: built-in 700 mAh battery Charging: USB-C Charging time: approximately 2 hours with a 5 V / 500 mA adapter Lamp head adjustment range: up to 200° Attachment: body clip and magnetic base Lens material: polycarbonate Protection rating: IPX6 Drop test: 1 m Dimensions: 81.2 × 35 × 18 mm Weight: 55 g including battery The total UV mode runtime includes operation at reduced power. Included Fenix SW05R-UV flashlight with body clip USB-C charging cable User manual and warranty card Frequently asked questions What is the Fenix SW05R-UV 365 nm light suitable for? The 365 nm UV light helps reveal markings that react to this wavelength, such as fluorescent security features on documents. Fenix intends the UV mode for professional inspection work. How do I switch between white and UV light on the SW05R-UV? Hold down the button for the desired light source for about half a second. The front button controls the white light and the side button controls the UV light. You can switch between the three white light levels with short presses of the front button. How do I use the SW05R-UV UV mode safely? Wear certified UV safety glasses and cover your skin. Direct the beam at the object being inspected and take care with reflections from glass, shiny metal and other surfaces. When is the Fenix SW05R-UV the right choice? The SW05R-UV is suitable when you need both white light for close-up work and 365 nm UV light during the same working day. If you work with both hands for long periods and need the light to follow your gaze, a headlamp is more convenient. A handheld flashlight with a longer beam is suitable for checking a more distant outdoor area or section of road. Our recommendation For close-up work with white light, try the 5 lm setting first. It may be enough to read a display or see the contents of a drawer. If you need a view of the entire work surface, select 30 lm and direct the lamp head slightly from the side. When attaching the lamp with the magnet, test its hold before letting go. When clipping it to the edge of a pocket, adjust the light angle after positioning the clip. For UV inspection, choose a matt work surface if possible and direct the lamp head at the object to be inspected before switching on UV mode. If the next task requires regular light, you can switch on the white LED using its separate button. After working, switch off the lamp before putting it in a bag. If you use the lamp for shift work, keep the charging cable in a designated place so the next user can charge the battery immediately if needed. Clip-on UV flashlight for inspection and close-up work The Fenix SW05R-UV provides both white work light and 365 nm UV light in a single unit. Choose this model if you need a portable inspection light that you can attach at a suitable angle while you work.
