The Fenix TK25R is a rechargeable LED flashlight for inspection rounds where you need to illuminate both distant objects and work surfaces within reach.
The Fenix TK25R is a rechargeable LED flashlight for inspection rounds where you need to illuminate both distant objects and work surfaces within reach. The main light delivers up to 3600 lm and reaches up to 350 metres in the manufacturer's test. The side light adds a broad white light, 365 nm UV light, red light and flashing modes. Suitable for Inspecting grounds, yards and facilities Moving around in the dark during security and maintenance work Illuminating equipment, labels and documents with the broad side light Professional inspection of UV-reactive security features Fieldwork that requires alternating between near and distant illumination Why choose the Fenix TK25R? The rear mode switch lets you choose between the main light, side light and locked position. Two tail switches allow you to use momentary illumination and change the brightness level. The white side light has two levels for close-range work, 30 and 150 lm. The 30 lm main light runs for up to 55 hours on one charge. The replaceable 5000 mAh battery charges directly in the flashlight in approximately 1.5 hours with a suitable adapter. Technical specifications Manufacturer: Fenix Model: TK25R Main light LED: Cree XHP50.3 Main light colour temperature: approximately 5700 K Main light, low: 30 lm, up to 30 m, up to 55 hours Main light, medium: 350 lm, up to 100 m, up to 7 hours Main light, high: 1000 lm, up to 170 m, up to 3 hours Main light, Turbo: 3600 lm, up to 350 m, up to 2 hours and 20 minutes Strobe: 3600 lm White side light, low: 30 lm, up to 30 hours White side light, high: 150 lm, up to 5 hours UV light: 365 nm, 900 mW according to the Fenix user manual Steady red light: 15 lm, up to 20 hours Flashing red light: 15 lm Flashing red and blue light: 15 lm Battery: Fenix ARB-L21-5000 V2.0, 21700 Li-ion, 5000 mAh Charging: USB-C port on the flashlight Charging time: approximately 1 hour and 30 minutes with a 9 V / 3 A adapter Controls: rear mode switch and two tail switches Body: A6061-T6 aluminium, HAIII hard-anodised finish Protection rating: IP68 Drop test: 1 m according to the Fenix user manual Dimensions: 164 × 36 × 26.2 mm Weight: 225 g including battery The measured total runtime in Turbo mode also includes operation at reduced light output due to heat. Included Fenix TK25R flashlight Fenix ARB-L21-5000 V2.0 battery USB-C charging cable Holster Wrist strap and spare seal User manual and warranty card Frequently asked questions How do I switch between the main light and side light on the Fenix TK25R? Use the rear mode switch to select Duty for the main light or Tactical Support for the side light. Then select the brightness level or light type with short presses of the function button. The middle position of the switch locks the flashlight. What is the TK25R's 365 nm UV light suitable for? The UV light helps you inspect markings that react to this wavelength, such as fluorescent security features on documents. Fenix intends the UV mode for professional use. Wear UV protective glasses and cover your skin. How long does the Fenix TK25R battery take to charge? With a 9 V / 3 A adapter, an empty battery charges fully in approximately 1.5 hours. With a 5 V / 3 A adapter, the charging time is approximately 2.5 hours according to the manual. Is the Fenix ALC-03 mount included? The ALC-03 is an accessory sold separately that can be used to attach the flashlight and direct the light onto a work surface. The standard package includes a holster for carrying the flashlight. When is the Fenix TK25R the right choice? The TK25R is suitable if you need a long-range beam, broad close-range light and occasional UV light during the same inspection round. If your work mainly involves inspecting documents and nearby markings, the lighter clip-on Fenix SW05R-UV is more convenient to carry. Our recommendation To read an instrument display or document, start with the 30 lm side light. The broad beam covers the work surface, and illuminating from the side can reduce glare from shiny surfaces. Switch to the main light when moving around outdoors. The 350 lm level is suitable for longer rounds, while Turbo is best reserved for a brief inspection of a distant object. Before heading to work, try all three positions of the mode switch while wearing gloves. This will help you quickly find the side light or lock position even in the dark. For UV inspection, place the object on a matt surface if possible and point the beam at it before switching on the light. Close the USB-C port cover after charging. When returning the flashlight to a bag or holster, leave the mode switch in the middle locked position. Long-range and close-range light in one flashlight The Fenix TK25R is suitable for work that alternates between outdoor inspections, close-range tasks and UV inspection. Choose this model if you want all three types of light in one USB-C rechargeable flashlight.
The Fenix TK25R is a rechargeable LED flashlight for inspection rounds where you need to illuminate both distant objects and work surfaces within reach. The main light delivers up to 3600 lm and reaches up to 350 metres in the manufacturer's test. The side light adds a broad white light, 365 nm UV light, red light and flashing modes. Suitable for Inspecting grounds, yards and facilities Moving around in the dark during security and maintenance work Illuminating equipment, labels and documents with the broad side light Professional inspection of UV-reactive security features Fieldwork that requires alternating between near and distant illumination Why choose the Fenix TK25R? The rear mode switch lets you choose between the main light, side light and locked position. Two tail switches allow you to use momentary illumination and change the brightness level. The white side light has two levels for close-range work, 30 and 150 lm. The 30 lm main light runs for up to 55 hours on one charge. The replaceable 5000 mAh battery charges directly in the flashlight in approximately 1.5 hours with a suitable adapter. Technical specifications Manufacturer: Fenix Model: TK25R Main light LED: Cree XHP50.3 Main light colour temperature: approximately 5700 K Main light, low: 30 lm, up to 30 m, up to 55 hours Main light, medium: 350 lm, up to 100 m, up to 7 hours Main light, high: 1000 lm, up to 170 m, up to 3 hours Main light, Turbo: 3600 lm, up to 350 m, up to 2 hours and 20 minutes Strobe: 3600 lm White side light, low: 30 lm, up to 30 hours White side light, high: 150 lm, up to 5 hours UV light: 365 nm, 900 mW according to the Fenix user manual Steady red light: 15 lm, up to 20 hours Flashing red light: 15 lm Flashing red and blue light: 15 lm Battery: Fenix ARB-L21-5000 V2.0, 21700 Li-ion, 5000 mAh Charging: USB-C port on the flashlight Charging time: approximately 1 hour and 30 minutes with a 9 V / 3 A adapter Controls: rear mode switch and two tail switches Body: A6061-T6 aluminium, HAIII hard-anodised finish Protection rating: IP68 Drop test: 1 m according to the Fenix user manual Dimensions: 164 × 36 × 26.2 mm Weight: 225 g including battery The measured total runtime in Turbo mode also includes operation at reduced light output due to heat. Included Fenix TK25R flashlight Fenix ARB-L21-5000 V2.0 battery USB-C charging cable Holster Wrist strap and spare seal User manual and warranty card Frequently asked questions How do I switch between the main light and side light on the Fenix TK25R? Use the rear mode switch to select Duty for the main light or Tactical Support for the side light. Then select the brightness level or light type with short presses of the function button. The middle position of the switch locks the flashlight. What is the TK25R's 365 nm UV light suitable for? The UV light helps you inspect markings that react to this wavelength, such as fluorescent security features on documents. Fenix intends the UV mode for professional use. Wear UV protective glasses and cover your skin. How long does the Fenix TK25R battery take to charge? With a 9 V / 3 A adapter, an empty battery charges fully in approximately 1.5 hours. With a 5 V / 3 A adapter, the charging time is approximately 2.5 hours according to the manual. Is the Fenix ALC-03 mount included? The ALC-03 is an accessory sold separately that can be used to attach the flashlight and direct the light onto a work surface. The standard package includes a holster for carrying the flashlight. When is the Fenix TK25R the right choice? The TK25R is suitable if you need a long-range beam, broad close-range light and occasional UV light during the same inspection round. If your work mainly involves inspecting documents and nearby markings, the lighter clip-on Fenix SW05R-UV is more convenient to carry. Our recommendation To read an instrument display or document, start with the 30 lm side light. The broad beam covers the work surface, and illuminating from the side can reduce glare from shiny surfaces. Switch to the main light when moving around outdoors. The 350 lm level is suitable for longer rounds, while Turbo is best reserved for a brief inspection of a distant object. Before heading to work, try all three positions of the mode switch while wearing gloves. This will help you quickly find the side light or lock position even in the dark. For UV inspection, place the object on a matt surface if possible and point the beam at it before switching on the light. Close the USB-C port cover after charging. When returning the flashlight to a bag or holster, leave the mode switch in the middle locked position. Long-range and close-range light in one flashlight The Fenix TK25R is suitable for work that alternates between outdoor inspections, close-range tasks and UV inspection. Choose this model if you want all three types of light in one USB-C rechargeable flashlight.
