The Fenix WF30RE is an Ex ib-marked rechargeable LED torch for gas zones 1 and 2 and combustible dust zones 21 and 22, provided that the device marking meets workplace requirements.
The Fenix WF30RE is an Ex ib-marked rechargeable LED torch for gas zones 1 and 2 and combustible dust zones 21 and 22, provided that the device marking meets workplace requirements. Its three constant light modes offer a maximum output of 280 lm and a beam distance of up to 170 m. The package includes the Fenix ARB-L21-2600Ex battery specified for this version, together with charging accessories. Suitable for use For inspection rounds in zones 1 and 2 with a suitable gas group and temperature class For maintenance work in combustible dust zones 21 and 22 with appropriate marking For inspecting equipment and facilities at chemical, energy and manufacturing companies For shift work where the torch can be charged outside the hazardous area Why choose the Fenix WF30RE? ATEX and IECEx markings provide a basis for checking the torch's suitability. The measured runtime on the 30 lm setting is up to 120 hours. The 120 lm setting reaches up to 120 m and runs for up to 15 hours and 40 minutes. The battery charge can be checked before entering the work area. The package includes the manufacturer-specified battery and charging accessories with protection. Technical specifications Manufacturer: Fenix Model: WF30RE Light source: Cree XP-G2 LED Low mode: 30 lm, up to 58 m, up to 120 hours Medium mode: 120 lm, up to 120 m, up to 15 hours and 40 minutes High mode: 280 lm, up to 170 m, up to 6 hours and 50 minutes Strobe: 280 lm Battery: Fenix ARB-L21-2600Ex Li-ion, 2600 mAh Charging: included adapter and charging protection ATEX certificate: TÜV 18 ATEX 8252 X IECEx certificate: IECEx TUR 18.0042X ATEX marking for gas atmospheres: II 2G Ex ib IIC T4 Gb ATEX marking for dust atmospheres: II 2D Ex ib IIIC T130°C Db Zones: gas 1 and 2, combustible dust 21 and 22 Permitted ambient temperature: −20 to +45 °C Protection rating: IP66 according to the manufacturer's product page Dimensions: 150.5 × 34 × 28 mm Weight: 215 g including battery Included in the package Fenix WF30RE torch Fenix ARB-L21-2600Ex battery Charging adapter and connection with charging protection Wrist strap and spare seal EU declaration of conformity, user manual and warranty card Frequently asked questions Which battery does the Fenix WF30RE 2600Ex version use? The Fenix ARB-L21-2600Ex battery is specified for this version. Choose a spare battery according to the torch's marking and the user manual supplied with this package. Where can the WF30RE battery be charged or replaced? Charge and replace the battery outside the hazardous area. Use the included adapter and charging protection to charge it. In which zones can the WF30RE be used? The manufacturer specifies gas zones 1 and 2 and combustible dust zones 21 and 22. Before use, compare the device's Ex marking, temperature limits and operating conditions with workplace requirements. When is the Fenix WF30RE the right choice? The WF30RE is suitable for repeated inspection rounds when the workplace requires a device with a Gb or Db protection level and charging takes place outside the hazardous area. For gas zone 0 or dust zone 20, choose a light with the appropriate Ga or Da marking. The Fenix WF11E is one such model whose suitability can be assessed against workplace conditions. We recommend Start your selection with the workplace zone and the required Ex marking. Then check the specific torch's rating label, battery model and the declaration of conformity included in the package. If the same model is sold with different batteries, refer to your device's documentation. Before the start of the shift, check the battery charge, housing and charging port cover in a safe area. If the housing is damaged or the cover is missing, do not use the torch in an Ex area. On a longer inspection round, select the most suitable setting for routine observation and use the 280 lm light to inspect a detail farther away. Arrange charging after the shift outside the hazardous area and keep the adapter and charging protection together. This way, the next user will have the accessories intended for this particular torch at hand. Rechargeable Ex torch for inspection and maintenance work The Fenix WF30RE combines three practical light settings, a beam distance of up to 170 m and a dedicated 2600Ex battery. Choose this package if the device marking and charging arrangements meet workplace requirements.
The Fenix WF30RE is an Ex ib-marked rechargeable LED torch for gas zones 1 and 2 and combustible dust zones 21 and 22, provided that the device marking meets workplace requirements. Its three constant light modes offer a maximum output of 280 lm and a beam distance of up to 170 m. The package includes the Fenix ARB-L21-2600Ex battery specified for this version, together with charging accessories. Suitable for use For inspection rounds in zones 1 and 2 with a suitable gas group and temperature class For maintenance work in combustible dust zones 21 and 22 with appropriate marking For inspecting equipment and facilities at chemical, energy and manufacturing companies For shift work where the torch can be charged outside the hazardous area Why choose the Fenix WF30RE? ATEX and IECEx markings provide a basis for checking the torch's suitability. The measured runtime on the 30 lm setting is up to 120 hours. The 120 lm setting reaches up to 120 m and runs for up to 15 hours and 40 minutes. The battery charge can be checked before entering the work area. The package includes the manufacturer-specified battery and charging accessories with protection. Technical specifications Manufacturer: Fenix Model: WF30RE Light source: Cree XP-G2 LED Low mode: 30 lm, up to 58 m, up to 120 hours Medium mode: 120 lm, up to 120 m, up to 15 hours and 40 minutes High mode: 280 lm, up to 170 m, up to 6 hours and 50 minutes Strobe: 280 lm Battery: Fenix ARB-L21-2600Ex Li-ion, 2600 mAh Charging: included adapter and charging protection ATEX certificate: TÜV 18 ATEX 8252 X IECEx certificate: IECEx TUR 18.0042X ATEX marking for gas atmospheres: II 2G Ex ib IIC T4 Gb ATEX marking for dust atmospheres: II 2D Ex ib IIIC T130°C Db Zones: gas 1 and 2, combustible dust 21 and 22 Permitted ambient temperature: −20 to +45 °C Protection rating: IP66 according to the manufacturer's product page Dimensions: 150.5 × 34 × 28 mm Weight: 215 g including battery Included in the package Fenix WF30RE torch Fenix ARB-L21-2600Ex battery Charging adapter and connection with charging protection Wrist strap and spare seal EU declaration of conformity, user manual and warranty card Frequently asked questions Which battery does the Fenix WF30RE 2600Ex version use? The Fenix ARB-L21-2600Ex battery is specified for this version. Choose a spare battery according to the torch's marking and the user manual supplied with this package. Where can the WF30RE battery be charged or replaced? Charge and replace the battery outside the hazardous area. Use the included adapter and charging protection to charge it. In which zones can the WF30RE be used? The manufacturer specifies gas zones 1 and 2 and combustible dust zones 21 and 22. Before use, compare the device's Ex marking, temperature limits and operating conditions with workplace requirements. When is the Fenix WF30RE the right choice? The WF30RE is suitable for repeated inspection rounds when the workplace requires a device with a Gb or Db protection level and charging takes place outside the hazardous area. For gas zone 0 or dust zone 20, choose a light with the appropriate Ga or Da marking. The Fenix WF11E is one such model whose suitability can be assessed against workplace conditions. We recommend Start your selection with the workplace zone and the required Ex marking. Then check the specific torch's rating label, battery model and the declaration of conformity included in the package. If the same model is sold with different batteries, refer to your device's documentation. Before the start of the shift, check the battery charge, housing and charging port cover in a safe area. If the housing is damaged or the cover is missing, do not use the torch in an Ex area. On a longer inspection round, select the most suitable setting for routine observation and use the 280 lm light to inspect a detail farther away. Arrange charging after the shift outside the hazardous area and keep the adapter and charging protection together. This way, the next user will have the accessories intended for this particular torch at hand. Rechargeable Ex torch for inspection and maintenance work The Fenix WF30RE combines three practical light settings, a beam distance of up to 170 m and a dedicated 2600Ex battery. Choose this package if the device marking and charging arrangements meet workplace requirements.
